Aspirateurs pour ATEX Categorie 3 Zone 2 (Gaz) et Zone 22 (Poussière)
Antistatique / Avec mise à la terre
For the recovery of combustible/conductive dusts you need a vacuum cleaner/dust collector specifically designed for these applications ATEX Category 1 or 2)
WARNING - Please take note of the following: Since a "cloud of dust" is not defined by ATEX, the National Fire Protection Agency (NFPA) warns that more than 0.8 mm of combustible dust laying on 5% of the floor of a room is considered a threat of explosion.
CRITÈRES DE SÉLECTION DES ASPIRATEURS
En fonction des zones à risque
Les catégories suivantes d'aspirateur seront notamment utilisées dans les zones indiquées:
| Aspirateurs de la catégorie 1 | dans la Zone 0 or 20 |
| Aspirateurs de la catégorie 1 ou 2 | dans la Zone 1 or 21 |
| Aspirateurs de la catégorie1, 2 et/ou 3 |
dans la Zone 2 or 22 |
Category 3 Zone 22 :
Warning: Please read all instruction & user manuals before operating any ATEX Cat. 3 Vacuum Cleaner to ensure it is safe to use in your workplace.
Electric Series
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Designed for the recovery of designated substances
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- For dry recovery only
- Includes disposable filter bags
- Stainless steel SAE 430 body and recovery tank
- Ready to use: filters and SD* tool kit included
- Equipped with SD* 4-wheels
- Dustless Drill Kit available
*SD - Static Dissipative
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Designed for the recovery of designated substances
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- For dry recovery only
- Includes disposable filter bags
- Stainless steel SAE 430 body and recovery tank
- Ready to use: filters and SD* tool kit included
- Equipped with a 2 + 2 cart
- Dustless Drill Kit available
*SD - Static Dissipative
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Designed for the recovery of designated substances
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Equipped with a Middle Ring for poly liners
- For dry recovery only
- Includes poly liners and clip
- Stainless steel SAE 430 body and recovery tank
- Ready to use: filters and SD* tool kit included
- Equipped with a 2 + 2 cart
- Dustless Drill Kit available
*SD - Static Dissipative
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
*SD Static Dissipative
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup of designated substances such as Asbestos, Lead, Silica, Mold, etc.
- Continuous Duty - Single or 3-phase (TEFC) motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS) with Teflon (PTFE) polyester media (H13)
- Main Cloth Filter and Dralon Pre-Filter are contained within a removable Filter Chamber
- For dry recovery only
- Carriage with suspended motor top (CSMT)
- Stainless steel SAE 430 body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Vertical mounting for areas with space constraints. Unit has a small environmental footprint
- Dustless Drill Kit available
SD* - Static Dissipative
TEFC - Totally Enclosed Fan Cooling
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup of designated substances such as Asbestos, Lead, Silica, Mold, etc.
- Continuous Duty - Singleor 3-phase (TEFC) motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- SD* Reverse Purge Cartridge and Skirt are contained within a removable Filter Chamber
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 16.3 ft² (15 100 cm²) for MRP models
- For dry recovery only
- Carriage with suspended motor top (CSMT)
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD*4-wheel cart and tool basket
- Vertical mounting for areas with space constraints. Unit has a small environmental footprint
- Dustless Drill Kit available
SD* - Static Dissipative
TEFC - Totally Enclosed Fan Cooling
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for general cleanup for the Food Industry
- Continuous duty single phase (TEFC) motor
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS) or Manual Reverse Purge (MRP)
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 16.3 ft² (15 100 cm²) for MRP models
- For dry recovery only
- Carriage with suspended motor top (CSMT)
- Stainless steel SAE 430 body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Vertical mounting for areas with space constraints. Unit has a small environmental footprint
- Equipped with an SD* 4-wheel cart for easy manoeuverability
SD* Static Dissipative
TEFC Totally Enclosed Fan Cooling
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Equipped with Manual Filter Shaker (MFS)
- Designed for general maintenance
- Continuous duty single and 3-phase motor/blowers available. 1-3 HP. 5 HP extended version available
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included. Other optional accessories according to your needs available
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ((U-O))
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Equipped with a Manual Reverse Purge with Filter Tubes (MRPFT)
- Designed for general maintenance
- Continuous duty single and 3-phase motor/blowers available. 1-3 HP. 5 HP extended version available
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included. Other optional accessories according to your needs available
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Ideal for wet recovery. Unit is equipped with a wet floater system and liquid filter. A dry filter is also included for occasional dry bulk recovery
- Designed for general maintenance
- Continuous duty single and 3-phase motor/blowers available
- Camlock, Ø2" (Ø50mm)suction intake
- For wet and dry recovery
- All powder coated steel construction
- Recovery Tank with a capacity of 17 gallons (65 liters) wet and 15 gallons (57 liters) dry
- Accessories kit included. Other optional accessories according to your needs available
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Category 3, Zone 2 (Gas) version available
- Muffler included
- Manometer included
- Equipped with a Manual Filter Shaker (MFS) system
- washable Main and Pre-Filters contained within a removable Filter Chamber
- Designed for the recovery of asbestos, lead, mold, etc.
- Continuous duty 3-phase motor/blower
- Available with 5.5 HP (4 kW) - 7.5 HP (5.5kW) motors (motors are in series)
- Camlock, Ø2.5" suction intake (accepts Ø70mm suction hose)
- For dry recovery only
- All powder coated construction
- Equipped with a polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 15 gallons (63 liters)
- Optional accessories according to your needs available
- Dustless Drill Kit available
Electrically Operated
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Category 3, Zone 2 (Gas) version available
- Muffler included
- Manometer included
- Equipped with a Manual Reverse Purge (MRP) system
- Reverse Purge Filter Cartridge contained within a removable Filter Chamber
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 19.1 ft² (17 700 cm²) for MRP models
- Designed for general cleanup
- Continuous duty 3-phase motor/blower
- Available with 5.5 HP (4 kW) - 7.5 HP (5.5kW) motors (motors are in series)
- Camlock, Ø2.5" suction intake (accepts Ø70mm suction hose)
- For dry recovery only
- All powder coated construction
- Equipped with a polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 15 gallons (63 liters)
- Optional accessories according to your needs available
- Dustless Drill Kit available
Electrically Operated
Certifications
II 3 D IP54 T160oC
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
- Ideal for the recovery bulky and lightweight scrap material
- Can be connected to process machines
- Continuous duty single and 3-phase motor
- Sight glass to monitor collection bag capacity
- For dry recovery only
- Powder coated steel construction. Stainless Steel AISI 304 available upon request
- Equipped with 4 wheels
Notes:
- Les filtres HEPA - efficacité de 99,995% sur les 0,3 microns - Testé IEST RP-CC001.3 - H14 SIPM selon la méthode EN 1822.
- ULPA Filters - efficacité de 99,999% sur les 0,3 microns - Filtration efficacité de 99,9995% à 0,18 microns - Testé IEST RP-CC001.3 - U15 SIPM selon la méthode EN 1822
- Tous les filtres HEPA / ULPA de Tiger-Vac sont testés DOP lors de l'assemblage, soit en amont ou en aval, à l'intérieur de l'aspirateur.
- Tous les filtres HEPA / ULPA de Tiger-Vac sont assemblés mécaniquement avec 3 boulons et inclus un joint mémoire spécialement conçus afin de prévenir toute fuite pendant la durée de vie du joint d'étanch pour assurer la santé et la sécurité de l'utilisateur final.
